Carriere SLB Passive Self-Ligating Brackets
Single-Piece MIM Construction (MIM=METAL INJECTION MOLDED)
Low Profile Mini Twin Rhomboid Shape Mechanism Located in Bracket Face
Archwire Sequence Offers Active
Engagement Opens with Explorer, Closes with Finger
- Greater distance between the brackets
(托架的間距大) - Elimination of the distorting forces within the
bracket with expression of linear impulse
(減少對BRACKET上線性的衝擊,以致於對其產生變形的力量) - Less need to change the arches
(較少更換弓絲) - Easier and faster ligation of the arch
(更快更簡單就可以更換弓絲) - Better rotation control
(較佳的旋轉控制) - Less friction of the arch (弓絲的磨擦力較少)
- Greater wire flexibility (較大的弓絲延展力)
- Better administration of the torque
(轉矩的控制較好) - Reduction of the force within the bracket (減少BRACKET內的力量)
- Reduction of the force on the teeth (減少對牙齒過大的力量)
- The inclination and torque incorporated into the brackets, have a lower anchorage demand, if we compare them with wider brackets, particularly on the top front teeth
(BRACKET上的軸傾度與轉矩較不會對牙齒產生影響,所以支抗的控制需求較小,假使是以上前牙較寬的BRACKET來做比較的話) - Shorter length of treatment time (治療期間較短)
- More comfort for the patient
(對病人的舒適度較佳) - binding forces of the wire tied to the arch are
not present(較不會出現弓絲上的綁住現象) - Opening can be achieved with a classical
explorer and closing can be done with the simple pressure of the
finger(用探針就可以打開滑蓋,關閉的時候以簡單的指頭一壓就可以關上)
這支東西的來源出自這裡→carriere wire
director & opener
CARRIERE WIRE DIRECTOR &OPENER
Carriere LX self-ligating bracketIssue Date: Dec 2006 |
|
For additional information, contact Ortho Organizers, 1822 Aston Avenue, |
- 在dr. carriere的Q&A 裡頭有談論到,SLB的槽溝之近遠心邊緣,為了讓滑動更順暢,特別做了ROUNDED(平滑) 的處理
- 還有這個矯正器的作用滑蓋開關是在牙的前方,跟其它自鎖式的SLB不同,對於換線也較容易,快速
- 他同時提到,CARRIERE
SLB與傳統的BRACKET最大的不同點在於,傳統式的BRACKET會產生對周圍的支持組織的一個"global state of
war"(全球戰爭)
有關於其矯正器的內建數據請看以下
最後他談到SLB最重要的是如何使用WIRE SEQUENCE(順序)
他提到要讓CARRIERE SLB更精確的把其內建的生物機制系統,更完整的表現出來,要按一定的WIRE SEQUENCE才能夠把CASE完整的做出來
1)初始弓絲為輕的,超彈性的圓線,這會把牙齒周圍組織叫醒(WAKE-UP),同時牙周的反應也較輕微,這個時期對ROTATION,CROSSBITE,VERTICAL,VESTIBULOLINGUAL MOVEMENTS有促進的作用
2)INTRUSION,TRANSLATION,TORQUE這些動作是由EDGEWISE形式的超彈性弓絲去表現
3)而空間的關閉是由彎制閉隙曲的不鏽鋼弓絲去完成
4)FINISHING STAGE(完成階段)是由軟的,方的CNA
弓絲去完成的
5)要做SETTLING的對咬關係則是由細的圓不鏽鋼弓絲去完成的
DR.CARRIERE的Q&A(由ORTHO ORGANIZERS製作)
CARRIERE LX SLB (ORTHO ORGANIZERS)
Carriere SLB Brackets - Case Kit(db orthodontics)
如何使用carriere LX(INTRODUCTIONS FOR USE)
(如果您想要多了解carriere LX,一定要耐心一看再看的影片)
●carriere SLB販售這項產品
是貝斯特公司(材料名為CARRIERE LX)
台灣貝斯特國際有限公司 (負責人吳俊輝先生)
(貝斯特國際貿易有限公司 TEL: 886-7- 235-5612 FAX: 886-7-2378201 )